oppo f1f flash file and flashing tutorial

OPPO F1F FIRMWARE UPGRADE SOLUTION EASY STEPS

Here we are giving flashing solution for oppo f1f.oppo f1f is aqualcomm chipset based phone,if your phone is soft bricked(hangs on logo),or have virus/malware problem or restarts after power on,you hav eto update firmware to solve these issue

there is two types of firmwares are availble for this model

  1. one you can flash with recovery mode via sd card
  2. second you can flash with flash-tool in emergency mode via pc

here we are providing both types of files,if you can access recovery mode,use sd card file,if you are unable to access recovery( phone is not powering on or not booting ) you have to flash with flash tool in emergency mode

SD CARD FLASHING..

  1. Put zip file in sd card of you phone
  2. Boot you phone into recovery mode by pressing vol. down +power key
  3. Select language
  4. Choose install update from sd card
  5. Select sd card and chose zip file which was downloaded
  6. Prosses will be start and done(make sure battery is charged more than 50%)

FLASHING WITH FLASTOOL..

  1. open msm8x39download tool
  2. select phone type 15309-for 16gb model,second option for 32 gb
  3. click verify tab
  4. when verify done,click start tab
  5. insert cable into phone while holding both volume keys
  6. make sure qualcomm drivers are installed,phone must be conected in Qualcomm HS-USB QDLoader 9008 mode
  7. flashing will be start in middle when flashing stoped and says waiting for device to connect jst restart your phone(press vol.+ vol.- and power key for 30 seconds)phone boot into fastboot mode release all keys for 30 seconds phone will be powered off 
  8. again hold both vol.keys and insert cable
  9. flashing will be start and finish.its done

download links are billow….

!!!!! FEEL FREE TO COMMENT IF YOU HAVE ANY QUERY REGARDING THIS PROBLEM !!!!!

OPPO F1F FLASH FILE

OPPO F1F-sd card file

 

 

 

 

 

 

LYF LS 4505 FRP (GOOGLE ACCOUNT LOCK) RESET IN 10 SECONDS

Lyf ls-4505 flame 8 qualcomm cpu frp reset solution easy way

here we are giving solution for lyf ls 4505 flsme 8 with infinity cm2 dongel,use cm2 QLM module to reset qualcomm frp lock.easy to use and fast ulocking

 

  1. First remove battery of the phone
  2. open infinty cm2 qlm software
  3. click service tab
  4. select frp reset in operation tab
  5. click format Fs/reset setting
  6. hold both volume keys of the phone and insert cable ( qualcomm emergency driver will be install-check device manager )
  7. frp remove done in seconds

injoy easy and fast unlocking

!!!! feel free to comment if you have any query regarding this post !!!!

 

INTEX AQUA CLASSIC HARD RESET SOLUTION

How to hard reset intex aqua classic smartphone

Intex aqua classic smartphone is and spd based chipset phone,and no hardreset key is defined in this phone so after pattern lock/pin lock forget we have to flash rom to unlock pattern or pin

but in this tutorial we are going to show you How To Unlock Pattern Or Pin in intex aqua classic without flash so follow bellow guide.

  1. turn off phone by removing battery
  2. press vol + and vol. – and power key at once
  3. after power on handset release all keys,phone boots into safe mode mmi test window
  4. press reset-factory data reset,but you dont knw password so here you cant reset your phone
  5. a small search icon will apear on the left uper corner of the screen
  6. seach here ant type BUILD,a build number option will apear just tapon 7 times,now you are devloper
  7. now again search from the icon USB,a usb debugging option will apear tick and enable it on
  8. now connect data cable to pc and reboot to recovery from adb mode by any android tool or adb command adb reboot recovery (make sure your phone is still in safe mode while sending commands from computer,so that you can allow this connection from phone,you can not allow usb connection from a locked phone in normal mode)
  9. now phone booted to recovery mode from here you can easly wipe data factory reset to remove pattern /pin lock etc and reboot system(scrol options by vol.keys select options with power key)

detail with screenshot are given billow………..

You can also use adb commands to reboot to recovery mode-

  1. Open adb folder
  2. Press shift+right click in folder
  3. Click on open command window here
  4. type commands
  • adb devices
  • adb reboot recovery

ADB SETUP LINK

!!!!! FEEL FREE TO COMMENT IF HAVE ANY PROBLEM REGARDING THIS POST !!!!!